You just need to tighten the hinge pin and here is a video to show you just how to do it. If you are more of a visual learner like me here are videos to show you.įix a Tilt-head KitchenAid Mixer that WigglesĪfter prolonged use you may find the head on your tilt-head mixer starts to wiggle. To check Place bowl lift handle in up position or lower the motor head to check clearance.(The full range of adjustment is one half turn or 180 degrees.) If you have a bowl-lift mixer you will find this screw where the head meets the neck of the mixer. Just a slight turn is all that is required: the screw will not rotate more than 1 ⁄4 turn (90 degrees) in either direction. Turn the screw counterclockwise to raise the bowl and clockwise to lower the bowl. Locate the screw on the neck of the mixer as seen in the picture below for your tilt-head mixer and adjust it so the flat beater just clears the bottom surface of the bowl.Attach flat beater and close top to see if it needs to be moved up or down. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |